Industrial Chemicals

Product Details:

1,2,3-Benzotriazole

Properties. Pure product is white needle crystal Solubility Slightly soluble in water, soluble in alcohol, benzene, methylbenzene, and other organic solvents.

Used in antirust oil (grease) products, widely used in air phase corrosion inhibitor and circulating water finishing agent in copper and copper alloy, motor vehicle antifreeze fluid, photo antifoggant, macromolecule stabilizer, plant growth regulator, lubricating oil additives, ultraviolet absorber etc. It can be also used with various antisludging agent and germicidal agent Mainly used as rust-preventer, anti-freezing liquid, antioxidant additive in lubricating oil, hydraulic oil, brake oil, transformer's oils. As anti discolor agent in paint, coating etc.

Additional Information:

• Item Code: BTA
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi/ Noida
• Delivery Time: Ready stock

Product Details:

Moly di sulphide (MoS₂) is a black powder insoluble in most solvents. It is an excellent high temperature lubricant stable in air to 350°C and in vacuum or inert atmospheres to 1200°C.

It is a lubricant grade of molybdenum disulphide [MoS2] available in technicalgrade.

Typical MoS2 content [calculated average] is 98%.

Applications :
Lubricants : Grease – Generally greases contain typically 3 percent MoS2 with the critical parameters being surface roughness, load & speed.

Pastes – These grease like products contain high levels (50- 70 percent ) of Mos2. Technical grade is typically used because this particle size can satisfy a broader range of requirements.

Aerosol sprays & Bonded coatings- Theses products contain up to 80 percent Mos2 and a binder material that can be either organic or inorganic in nature. MIL – Spec coatings invariably use Technical Grade but if the product is in aerosol form Super fine may be required to guard against spray tip clogging.

Friction products: Friction materials includes brake pads and clutch linings for automotive and aircraft applications. Technical grade is used in these products to reduce noise (squeaking), dependence of friction level on sliding speed and temperature, and wear. Cold forging and cold extrusion – Technical fine grade is preferred.

Engineering plastics Engineering plastics- Both Technical & Technical Fine grade may be used, depending on the polymer system.

Sinter metallurgy; Carbon brushes:

Physical Properties:

• A shining bluish-gray to black powder.
• Mol. Wt:160. 08
• Sp. Gr. 4. 8-5
• Hardness 1 on Mohs scale.
• Plastics: it gives self-lubrication, lower coefficient of friction and much lower wear on parts.
• Rubber: to reduce friction, in elastomers (as mold release and finish).
• Lubricant: high temperature lubricants

Pack size: 1kg,5kg & 25kg.

Additional Information:

• Item Code: MDS
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: Ready stock

Product Details:

Technical Grade Urea
Technical Grade Urea is an organic compound. Urea serves an important role in the metabolism of nitrogen-containing compounds. It is a colorless, odorless solid, highly soluble in water, urea is basically non-toxic. It get Dissolved in water easily, urea is not acidic. Urea is also not alkaline. The human body uses urea in many processes, most notably nitrogen excretion. The liver forms it by combining two ammonia molecules with a carbon dioxide molecule in the urea cycle. Urea is widely used in fertilizers as a source of nitrogen and is an important raw material for the chemical industry, animal feed, laminated boards.

Additional Information:

• Delivery Time: Ready stock

Product Details:

Xanthan gum is a high-molecular weight biopolymer, provides versatile rheology control in a wide range of brines, drilling and fracturing fluids. Xanthan gum is considered non-hazardous and suitable for use in environmentally sensitive locations and applications.

Xanthan gumreadily disperse  and can be mixed into water under low shear conditions without the formation of lumps and “fisheyes” often seen with non-dispersible polymers, improving utility and efficiency.

The Xanthan Gum (E415) provided by us is a vegetable-based gum which is used for thickening and gelling purposes.

Additional Information:

• Delivery Time: Ready stock

Product Details:

Magnesium Oxide is used as a basic refractory material for crucibles and as a principal fireproofing ingredient in construction materials. As a construction material, magnesium oxide wallboards have several attractive characteristics: fire resistance, moisture resistance, mold and mildew resistance, and strength.MgO has an important place as a commercial plant fertilizer and as animal feed.

Additional Information:

• Port of Dispatch: New Delhi
• Delivery Time: Ready stock

Product Details:

SIPERNAT® 22 S
(Silicon dioxide; Precipitated Silica)
is used as a flow and anticaking agent in many applications as well as a special-purpose ingredient for mechanical graphics papers. In plant protection, this product is recommended as a carrier in solid formulations such as wettable powders (WP) and water-dispersible granules (WG) if grinding is to be avoided.

Additional Information:

• Item Code: Sipernat-22S
• Delivery Time: Ready stock
• Packaging Details: 15 kg. HDPE bags.

Product Details:

Zinc sulfide (or zinc sulfide) is an inorganic compound with the chemical formula of ZnS.
This is the main form of zinc found in nature, where it mainly occurs as the mineral sphalerite.
Although this mineral is usually black because of various impurities, the pure material is white.

Additional Information:

• Port of Dispatch: New Delhi
• Delivery Time: Ready stock

Product Details:

Sodium acetate trihydrate
In the food industry, sodium acetate is used as an acidity regulator, emulsifier, and preservative. It can give potato chips a salt and vinegar flavor. In pharmaceutical industry, it is used for replenishing lost electrolytes, as a diuretic, and in reusable heating pads and hand warmers. Sodium acetate trihydrate can be used to neutralize the industrial mineral acids discharge. In the textile and synthetic rubber production.
Sodium acetate is a mordant in dyeing. Other applications are in photography, as an additive to food, in purification of glucose, in preservation of meat, in tanning, and as a dehydrating agent. In analytical chemistry it is used to prepare buffer solution.

Additional Information:

• Delivery Time: Ready stock

Product Details:

Ammonium acetate

Ammonium acetate is a chemical compound with the formula NH₄CH₃CO₂. It is a white, hygroscopic solid and can be derived from the reaction of ammonia and acetic acid.

 MF: CH₃COONH₄
CAS: [631-61-8]
Appearance: white crystalline material
Solubility (10% soln.): clear colourless solution
ph (5% solution): 6. 7 – 7. 5
chlorides: 0. 005% max.
sulphates: 0. 005% max.
water: 2. 5% max.
assay: 97. 0% min.

USES: Ammonium acetate is used for preserving food, chemical analysis, pharmaceutical formulation and other industrial applications.

 

Additional Information:

• Item Code: Ace-NH
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi/ Noida
• Delivery Time: Ready stock

Product Details:

We have carved a niche in the industry by presenting a wide gamut of Sodium Acetate Anhydrous. It is used in salt form as the auxiliary in acetylation, dehydrating agent. Also, the powder is intermediate in color and dyes manufacturing units, pharmaceuticals, and cinnamic acid. The offered salt is formulated under the supervision of skilled pharmacists by utilizing clinically tested and proven compounds. The composition formed after this formulation results in improving results. The provided salt is completely focused and used for developing a good solvent.

Features:

• Contains essential mineral
• Anti-allergic in nature and quick effects
• Highly effective and reduces toxicity

Additional Information:

• Item Code: Na-ac_n

Product Details:

Aerosil-200 (Fumed Silica, Colloidal Silica)

Applications:

• Paints and coatings
• Unsaturated polyester resins, laminating resins and gel coats
• HTV- and RTV-2K-silicone rubber
• Adhesives and sealants
• Printing inks
• Cable compounds and cable gels
• Plant protection
• Rheology and thixotropy control of liquid systems, binders, polymers, etc.
• anti-settling, thickening, and anti-sagging agent
• Reinforcement of HTV- and RTV-2K silicone rubber
• Improvement of free flow and anticaking characteristics of powders

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: Immediate

Product Details:

Dimethicone Liquid is used in food, pharma & cosmetics applications. Dimethicone is a 100% Active Polydimethylsiloxane designed to be used in food , pharma and cosmetic applications. It has excellent Defoaming and Antifoaming properties and has very good dispersibility.

Additional Information:

• Delivery Time: Ready stock

Product Details:

Silica precipitated
Taversil 100

Precipitated silica  present a wide applicability spectrum, and its use is significant in the animal feed and human food sector, acting as a carrier for aromas or other additives as active liquid substances; it is used in agriculture as a grinding aid or as a carrier and it can also exert an anti-caking and/or fluidifying effectin many other different fields besides Feed or foodstuffs, such as the pharmaceutical industry, or in paints and varnishes. Applications:

• Filler, softener and performance improvement in rubber and plastics.
• Cleaning, thickening and polishing agent in toothpaste for oral health care.
• Food processing and pharmaceuticals additive as anti-caking, the thickening agent.
• Moisture absorbent to make liquids into powders.

Additional Information:

• Item Code: ppt-sio2
• Port of Dispatch: New Delhi
• Delivery Time: Immediate

Product Details:

EDTA Ferric sodium salt
Ethylene diamine tetraacetic acid ferric sodium salt
Formula: C₁₀H₁₂FeN₂NaO₈
Property
It is a stable water soluble metal chelator, mainly used in agriculture and horticulture and iron is present in a chelated form.

Specification
Appearance: Yellow crystalline powder
Iron chelated: 12% min
Water insoluble: 0.1% max
PH value (1% of the solution): 3.5-5.5

Additional Information:

• Item Code: EDTA-FeNa
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi/ Noida
• Delivery Time: Ready stock

Product Details:

Uses:

• Zinc acetate can also be used to treat zinc deficiencies. As an oral daily supplement, it is used to inhibit the body's absorption of copper as part of the treatment.
• Zinc acetate is also sold as an astringent in the form of an ointment, a topical lotion for the topical treatment of acne. It is commonly sold as a topical anti-itch ointment.
• In chewing gum, zinc acetate is a breath freshener and plaque inhibitor.
• Industrial applications include wood preservation, manufacturing other zinc salts, polymers, manufacture of ethylene acetate, as a dye mordant, and analytical reagent.
• It is used in commercial nuclear power plants as a plating inhibitor on primary water piping.

Product Details:

Benzoyl Peroxide (BPO),

Synonyms: Dibenzoyl peroxide; benzoic acid peroxide; benzoyl superoxid
CAS No.: [94-36-4]

Specifications Item

Purity 75%+/-1min

Moisture 24+/-1%max

Free cl 0.3%max

Free acid(as C6H5COOH) 1%max

USES: Plastic monomer polymerization initiator; polyester resin and epoxy resin curing agent; chlorination, bromination, Ion Exchange & catalyst.

 

Additional Information:

• Item Code: BPO
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: Immediate

Product Details:

Cab-O-Sil M-5 (Fumed Silica) is powder that are available with either hydrophobic or hydrophilic surface. The versatility of our CAB-O-SIL fumed silicas is due to key product attributes, such as high surface area, surface chemistry, aggregated structure, and purity, all of which lead to excellent performance.

Fumed silica
(CAS number 112945-52-5)

Also known as pyrogenic silica because it is produced in a flame, consists of microscopic droplets of amorphous silica fused into branched, chainlike, three-dimensional secondary particles which then agglomerate into tertiary particles. The resulting powder has an extremely low bulk density and high surface area. Its three-dimensional structure results in viscosity-increasing, thixotropic behavior when used as a thickener or reinforcing filler.

Applications: Fumed silica serves as a universal thickening agent and an anti caking agent (free-flow agent) in powders. Like silica gel, it serves as a desiccant. It is used in cosmetics for its light-diffusing properties. It is used as a light abrasive, in products like toothpaste. Other uses include filler in silicone elastomer and viscosity adjustment in paints, coatings, printing inks, adhesives and unsaturated polyester resins. It is also used in the production of cat litter box filler.

Packing: 10kg. bag

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New delhi
• Delivery Time: Ready stock

Product Details:

MAGNESIUM SILICOFLUORIDE (MgSiF₆-6H₂O)
CAS Registry No. [16949-65-8]
Magnesium Fluorosilicate is a fine, white, odorless, granular crystal. Dust may cause irritation of eyes, skin, mucous membranes, and respiratory tract.
Wear appropriate personal protective equipment.
Use: Condtruction chemical

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: Ready stock

Product Details:

As a topmost firm, we are betrothed in offering Magnesium Sulphate 7-Hydrate. This powder is used in a variety of industrial sectors. The offered powder has the properties of fireproofing fabric, dyeing and printing calicos. It is processed using pearl, chloride, and other substances. Our produced salt has received appreciation for delivering quality salt to the clients. This salt is formulated using two or three compounds. The offered salt compounds are clinically tested and approved under industry norms.

Features:

• Mineral water
• Tanning leather
• Frosted paper

Additional Information:

• Item Code: Mg-SO4-cry

Product Details:

Magnesium oxide 
Grade: Commercial, Heavy.
Use: Industrial
Magnesium oxide (MgO), or magnesia, is a white hygroscopic solid mineral that occurs naturally as periclase and is a source of magnesium (see also oxide). It has an empirical formula of MgO.

Additional Information:

• Delivery Time: Ready stock

Product Details:

Silicone defoamer

Our silicone antifoams/ defoamers are used in various industrial applications to control or to eliminate foam generation thereby optimising productivity. They perform in difficult conditions such as high temperatures and high pH values.

• Reduce surface tension.
• Improve efficiency of systems.
• Prevent or control foam build up.
• Destroy foam.

• Appearance: Milky white liquid dispersable in water.
• Solid Contents: 20-22 % w/w.
• pH of 5% solution: 6.5-7.5
• Specific gravity: 0.90-90.95

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: Ready stock

Product Details:

Calcium Nitrate granules
Grades: Prills/ granules

Formula: Ca(NO₃)₂.xH₂O
Absorbs moisture from the air.

Specifications:
Total water soluble calcium: 18.5% min.
Total nitrogen (ammonical & nitrate form): 15.5% min.
Nitrogen (Nitrate) as N: 14.5% min.
Matter insoluble in water: 1.5% max.

Calcium Nitrate is mainly used as a nitrogen fertilizer in agriculture and is produced in granulated form.
It is also used in wastewater pre-conditioning for odor emission prevention, and in set accelerating concrete admixtures.
The dissolution of anhydrous calcium nitrate is highly endothermic. For this reason, calcium nitrate is sometimes used for regeneratable cold packs.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Delivery Time: Ready stock

Product Details:

4-tert-Butylcatechol (TBC) is an organic chemical compound which is a derivative of Catechol. It is added as a stabilizer and an inhibitor of polymerization to butadiene, styrene, vinyl acetate and other reactive monomer streams. It is 25 times better than hydroquinone at 60⁰C for polymerization inhibitory effect. Also used as a stabilizer in the manufacture of polyurethane foam. It also can be used as an antioxidant for synthetic rubber, polymers and oil derivatives.

Additional Information:

• Item Code: TBC
• Delivery Time: Ready stock

Product Details:

Micro Crystalline Cellulose powder is a purified and partially depolymerized crystalline powder, which is composed of porous particles. It is tasteless, odorless and white in color. We offer this powder in plain grade. For its manufacturing, cellulose, collected from fibrous material, undergoes controlled hydrolysis with dilute mineral acid. The resulting product is this powder.

SPECIFICATION:-

Applications:
Bakery: Controls Flowability, gives Baking Stability, gives consistent creamy mouth feel, exceptional for low fat products, upgrades product stability, improves texture, acts as bulking agent.
Fluids: Brings stability in hot and cold process, Improves creamy mouth feel, Ideal for dietary health drinks, Improves Opacity in milk shakes.
Dairies: Serves as stabilizer in Ice cream to prevent crystallization, Works as bulking agent, Improves texture, Improves texture and mouth feel in processed cheese.
Meat & sea foods: Enhances texture and mouth feel. Excellent Freeze and appropriate stability. Holds natural characteristics and juiciness of products.
Extrisition: Used in low calorie spaghetti, macaroni, noodles and brownies, Raises texture and yield.
Cosmetics: Hydrocolloid compatibility aids in manufacturing creams, lotions and various cosmetic emulsions.
Welding electrodes: Improves electrode surface and burning of electrodes, Provides better incineration due to very low ash contents.
Paints: For better texture , Controls Viscosity, Improves holding property of paints on the surface.
Cements & Ceramics: Improves binding property, Absorbs moisture and prevents clogging.
Rubber: Aids in tyre manufacture & rubber yarn for good strength and superior texture.

Additional Information:

• Item Code: MCCP
• Delivery Time: Ready stock

Product Details:

CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: Ready stock

Product Details:

Diatomaceous earth is a type of powder made from the sediment of fossilized algae found in bodies of water. Because the cells of these algae were high in a compound called silica, the dried sediment produced from these fossils are also very high in silica. These deposits are found all over the world. The ancient Greeks used diatomaceous earth to make building materials, like bricks and blocks. Later on it became popular in Europe for various industrial uses.

Additional Information:

• Item Code: DE
• Delivery Time: Ready stock
• Packaging Details: 20 kg. PP bags with liner.