Lab Grade Chemicals

Product Details:

Ammonium Molybdate



Uses:

This salt is used for metal corrosion inhibitor, descaling agents.
In the cosmetic sector, it is also used as a bleaching agent for skin and hair related issues.
This salt helps in removing the corrosion particles and dead tissues and cells in the body.
Furthermore, the salt has the properties that aid in reducing white patch, mucous, and other skin disorders.

• Water treatment chemicals
• Corrosion inhibitor
• Pigments
• Micronutrients
• Pharmaceuticals
• Laboratory
• Metal Treatment chemicals

Additional Information:

• Item Code: AMB
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: Immediate

Product Details:

Potassium Bitartrate (Cream of tartar)
Formula KC₄H₅O₆, is a byproduct of winemaking.
It is the potassium acid salt of tartaric acid.
Synonyms: Potassium acid tartrate; Potassium hydrogen tartrate; Cream of tartar

In food, cream of tartar is used for:

Stabilizing egg whites, increasing their heat tolerance and volume
Stabilizing whipped cream, maintaining its texture and volume
Anti-caking and thickening
Preventing sugar syrups from crystallizing
Reducing discoloration of boiled vegetables
Baking powder, as an acid ingredient to activate baking soda
Sodium-free salt substitutes, in combination with potassium chloride

Cream of tartar can be mixed with an acidic liquid such as lemon juice or white vinegar to make a paste-like cleaning agent for metals such as brass, aluminum or copper, or with water for other cleaning applications such as removing light stains from porcelain^.

Cream of tartar was often used in traditional dyeing where the complexing action of the tartrate ions were used to adjust the solubility and hydrolysis of mordant salts such as tin chloride and alum.

Cream of tartar, when mixed into a paste with hydrogen peroxide, can be used to clean rust from some hand tools, notably hand files. The paste is applied and allowed to set for a few hours and then washed off with a baking soda/water solution. Another rinse with water, a thorough drying and a thin application of oil will protect the file from further rusting.

Pack Size:- 25kg. bags.

Product Details:

Sodium Molybdate. The offered salt help is formulated from dehydrated and dead tissues. In addition, the offered salt is originally formulated in powder form. This powder is processed to form cream, liquid, and powder to fight vitiligo skin disorder and corrosion issues in metal frames. Our deft professionals develop the solution using avant-garde techniques and opt for several clinical quality tests before dispatching to the clients.

Application:
Used as a metal corrosion inhibitor, descaling agents, bleaching agents and skin and hair to promote the protection agent.
Used as the analytical reagent for determination of alkaloids, dyes and pharmaceutical industry.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Delivery Time: Ex. stock

Product Details:

Sodium Chloride (Pharma Grade)

is a white crystalline powder is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. It is one of the most abundant minerals on Earth and an essential nutrient for many animals and plants. Pharmaceutical grade sodium chloride or pharmaceutical salt is manufactured under appropriate controls norm for pharmaceutical production it is a screened, granular, white crystalline sodium chloride manufactured under stringent process control procedures.

Additional Information:

• Delivery Time: Ready stock

Product Details:

Moly di sulphide (MoS₂) is a black powder insoluble in most solvents. It is an excellent high temperature lubricant stable in air to 350°C and in vacuum or inert atmospheres to 1200°C.

It is a lubricant grade of molybdenum disulphide [MoS2] available in technicalgrade.

Typical MoS2 content [calculated average] is 98%.

Applications :
Lubricants : Grease – Generally greases contain typically 3 percent MoS2 with the critical parameters being surface roughness, load & speed.

Pastes – These grease like products contain high levels (50- 70 percent ) of Mos2. Technical grade is typically used because this particle size can satisfy a broader range of requirements.

Aerosol sprays & Bonded coatings- Theses products contain up to 80 percent Mos2 and a binder material that can be either organic or inorganic in nature. MIL – Spec coatings invariably use Technical Grade but if the product is in aerosol form Super fine may be required to guard against spray tip clogging.

Friction products: Friction materials includes brake pads and clutch linings for automotive and aircraft applications. Technical grade is used in these products to reduce noise (squeaking), dependence of friction level on sliding speed and temperature, and wear. Cold forging and cold extrusion – Technical fine grade is preferred.

Engineering plastics Engineering plastics- Both Technical & Technical Fine grade may be used, depending on the polymer system.

Sinter metallurgy; Carbon brushes:

Physical Properties:

• A shining bluish-gray to black powder.
• Mol. Wt:160. 08
• Sp. Gr. 4. 8-5
• Hardness 1 on Mohs scale.
• Plastics: it gives self-lubrication, lower coefficient of friction and much lower wear on parts.
• Rubber: to reduce friction, in elastomers (as mold release and finish).
• Lubricant: high temperature lubricants

Pack size: 1kg,5kg & 25kg.

Additional Information:

• Item Code: MDS
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: Ready stock

Product Details:

IODINE PRILLS

Apperance:  Black-grey prill or granule crystal
Assay:  99.5%-100.5%
Usage:
Used to make pesticide,feed additives,dye, iodine solution,test and medications
Used to make equivalent  solvent, determine iodine value,the content and calibration of sodium solution concentration.
Used to be disinfectant , photoengraving for good fittings and thinning liquid preparation.
CAS No. : 7553-56-2

Additional Information:

• Port of Dispatch: New Delhi
• Delivery Time: Ready stock

Product Details:

POTASSIUM IODIDE

also called KI is a salt of stable (not radioactive) iodine. The compound is required by the body to make thyroid hormones.

The major uses of potassium iodide include nutritional supplement in animal feeds. It is also used medicinally in tablets, and also finds application in hair dyes.

Potassium Iodide is sometimes added in small quantities to table salt for idolization. This crystalline salt is also used as a fluorescence quenching agent in biomedical research because of collisional quenching by its iodide ion.

Additional Information:

• Item Code: KI
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: Ready stock

Product Details:

We are leading Manufacturer of Sodium iodide and our product is made up of good quality.

Sodium iodide

• CAS: [7681-82-5]
• Assay:99%
• M.F:NaI
• M.W:149.89
• Density:3.66g/cm3

Appearance:White granule or powder crystals

Application: pharmaceutical raw materials ,organic synthesis

Package:25kg/cardboard drum

MOQ: 5 kg

Additional Information:

• Item Code: NaI
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: New Delhi
• Delivery Time: 4-5 days